Pre-cleaner drum SEMB
-
Pre-cleaner drum for pre-cleaning
-
Pre-cleaner drum before storage
-
Pre-cleaner SEMB on pre-cleaning in storage grain silo
-
Pre-cleaner drum for pre-cleaning with hight flow
-
Wastes extraction screw for grain cleaning
This equipment provides a high capacity pre-cleaning at bulk product reception before storage for all powdery products, cereals, etc...
It is essential in the corn drying storage installations to remove most of cobs, leaves, stems, stones, etc…
It reduces the number of dryers cleaning operations and limits significantly the clogging.
Installed downstream of a cleaning line it protects the handling equipment and lower the work load on the cleaners in order to maximize their capacity.
The SEMB ensures the removal of very small particles (dust in cereals) and undesirable large sized foreign materials.
FEATURES
- Continuous operation without shocks.
- Inlet with dispatcher and pre-suction at upper part
- Size of sieve mesh according to use
- Feeding shovel with adjustable slope.
- Suction channel catching the fine wastes.
- Expansion chamber collecting the light wastes
- Screw equipped with a check valve at the end
Options
- Good product discharge hopper
- Large wastes receiving hopper in two parts according to type
- Reclaiming hopper of light wastes beneath the flap box
- Suction nozzle
- Possible damping bend at the inlet of the product to be treated
- Anti-filling sensor with probe
- Built-in pads filter
Video
Operating principle
The removal of large wastes is obtained from the good product passing through the mesh of rotary drum , from the outside to the inside of the drum (1). The size of the sieve mesh will be adjusted to your requirements.
The rotary cylindrical sieve is fitted with an adjustable deflector (2) and a rotative brush for cleaning. A wastes screw and a check valve are provided at the outlet.
The feeding flap (3) has an adjustable angle and can allow a product by-pass.
The inlet is provided with a dispatcher, with pre-suction at the upper part to ensure a maximum efficiency.
This equipment is fitted with a suction duct (4) producing a strong air flow to bring the fines wastes to an expansion chamber . The fines are collected and handled by a screw fitted with an insulation flap at its end.
The cellular dispatcher
In case of misaligned as it often occurs in existing plants, it is not always easy to bring the product in line with the pre-cleaner.
The cellular dispatcher is provided to supply the pre-cleaner off its line, all guaranteeing a perfect distribution of the product all over the SEMB drum width. In addition, it ensures a perfect flow regulation and the transit of foreign bodies to be cleaned out through a specific outlet.
Documentation